| Leave the washer door open after every cycle to prevent mold, mildew, and musty odors from developing inside the rubber gasket. Get a clip to keep it open |
| Clean the dryer lint screen before every single load to maximize airflow, reduce drying times, and prevent dangerous home fire hazards. |
| Once a month, run a hot water cycle using Affresh tablets, then clean out the drum with a towel to wipe off any mildew |
| Wipe down the rubber door seal with a damp cloth monthly to remove trapped hair, lint, and stagnant puddle water. |
| Vacuum out the dryer lint trap slot and venting pipe annually to remove deep-clogged debris that the mesh screen misses. |
| If you have a frontloader, open and clean the filter in the front (bottom) of the washer every few months. |
| Pull off and wash the removable detergent dispenser drawer regularly to clear out crusty soap and mold growth. |
| Wipe the moisture sensors inside the dryer drum with rubbing alcohol periodically |
| Inspect and clean the exterior dryer vent hood outside your home to ensure the exhaust flap opens freely. |
| Dry the inside folds of the rubber door seal with a microfiber towel after your final laundry load of the day. |
| Clean the tiny mesh filters inside the water inlet hoses annually to prevent slow filling caused by sediment and mineral buildup. |
| Slide the entire washer away from the wall once a year to sweep away accumulated lint and dust from the rear motor vent. |
